USAGE
For painting on mineral and organic surfaces (wallpaper, plaster, clay, concrete, sand-lime brick, plasterboard, etc.). It is also suitable for matte and absorbent synthetic resin emulsion paints (always test on a small area first).
Suitable for interior use.
TOOLS
Brush, roller, airless spray.
COLOUR
Available in white or light shades only, Auro Wall Paint can be tinted with 25 g of pigments for 10 L of paint.
To prepare the color, simply dilute the pigments in a little water and mix well to avoid lumps. The mixture should have the texture of slightly runny yogurt. Once the mixture is homogeneous, incorporate it into the paint and mix well.
Note: The wet paint remains translucent during application but becomes completely opaque once dry.
APPLICATION METHOD
Intact and slightly absorbent surfaces: Regularly impregnate with Auro Wall Paint diluted with a maximum of 10% water if necessary. After 4 to 6 hours of drying, cover with one to two coats of undiluted Auro Wall Paint using a brush, roller, or airless spray.
Two coats are generally necessary to achieve a good finish.
Highly and irregularly absorbent surfaces: Apply a casein primer to even out the surface. After 8 hours of drying, cover with one coat of undiluted Auro Wall Paint using a brush, roller, or airless spray. An additional coat can be applied but is not necessary if the desired result is achieved.
DRYING TIME UNDER NORMAL CLIMATIC CONDITIONS (20°C / 65% relative humidity)
Can be recoated after approximately 4 to 6 hours. Fully dry and resistant after 28 days. Drying time increases with higher air humidity and/or lower temperature. Adequate tempered ventilation is essential during drying.
