1 1

Tockay

Carnauba Wax Emulsion (500 ml)

Carnauba Wax Emulsion (500 ml)

 

500 ml covers between 330 and 385 sq.ft.
...................................................................................................
Carnauba Wax Emulsion can be applied to previously treated (oiled or waxed) wood and cork floors, terracotta floors, countertops, or furniture.
$20.50 CAD
$20.50 CAD
Sale Sold out
View full details

Description

Carnauba wax floor emulsion is applied to previously treated (oiled or waxed) wood and cork floors, terracotta floors, worktops, or furniture to reinforce the protection and increase the dirt-repellent quality of the surfaces. Added to the washing water, it is used for the care of treated floors. Under certain conditions, Carnauba Was Emulsion can also be used on lime plaster to improve its water repellency. Depending on the type of installation and surface, it covers from 660 ft² to 770 ft²/litre.

Rendement

  • 500 ml covers between 330 and 385 sq.ft.

Application

When using the product, the complete product information must be observed.

 

APPLICATION

  • The product must always be diluted! It is recommended to test the product on the surface beforehand.
  • Use the Carnauba Wax Emulsion sparingly on smooth floors; otherwise, the floors will become slippery.
  • Do not use on heavily used surfaces, such as floors and worktops, without prior treatment with oil.

 

MAINTENANCE

Apply to dull surfaces as needed.  Glossy surfaces do not require special care. Add 1-2 tablespoons of carnauba wax emulsion to 5L of warm water; then wipe the surface with a damp cloth. Allow to dry. It is not necessary to repeat the polishing.

 

BASIC PROTECTION FOR OILED SURFACES

  • Observe the prescribed curing time of the pre-treatment. Dilute 1 part Carnauba Wax Emulsion with 2 parts water, and apply a thin layer with a soft, lint-free cloth or a wide brush. Allow to dry. The process can be repeated if necessary. Further polishing can be done with a soft cloth or pad.

 

IMPREGNATING UNTREATED WOOD BEAMS, PANELS AND INSIDE OF WOOD CABINETS

  • Sand the untreated wood (100-120 grain) and dust. Dilute 1 part Carnauba Wax Emulsion with 4 parts water and apply evenly with a soft sponge or a brush. Allow to dry.
  • The process can be repeated if necessary. It is possible to polish further with a soft cloth or pad.
  • Intermediate sanding (120 grain) may be helpful.

 

DRYING

  • Approximately 1-2 hours at 20°C.

Fiches techniques et Documentation

Technical Data Sheet

Security Data Sheet